home *** CD-ROM | disk | FTP | other *** search
- Path: turnpike.com!DavidE
- From: David English <DavidE@turnpike.com>
- Newsgroups: comp.dcom.modems
- Subject: Re: Need Help w/ Microcom AX/9600+
- Date: Sun, 18 Feb 1996 15:12:21 +0000
- Organization: Turnpike Ltd
- Distribution: world
- Message-ID: <nRKYuAAVH0JxoA5o@turnpike.com>
- References: <4g67tv$ms5@terra.cnct.com>
- NNTP-Posting-Host: pillar.turnpike.com
- X-NNTP-Posting-Host: pillar.turnpike.com
- MIME-Version: 1.0
- X-Newsreader: Turnpike Version 1.11 <U2yaxlNz9m7tpk5wwwfqeW1so7>
-
- In article <4g67tv$ms5@terra.cnct.com>, psapp <psapp@cnct.com> writes
- > I have recently acquired a Microcom AX/9600+ modem. I have no
- >setup docs, and it has two banks of DIP switches 10 bit in front, 8 bit
- >in the rear as well as two button switches in the front. There is only
- >one switch clearly labeled "reset". I would greatly appreciate any help
- >on this.
-
- Have a look at the documents on ftp.microcom.com
-
- They don't mention an AX/9600+
-
- document 2003 describes the AX/9624c
- - but that only has 8 front switches
-
- document 2006 describes the QX/12K
- - it does have 10 front switches etc.
-
- Good luck
- --
- Dave English, T U R N P I K E Ltd
- 250/256 High Street, DORKING, Surrey, UK. RH4 1QT
- My other computer's a brain
-